< / P > < P > closet door installation process < / P > < P > 1, on track installation. Need to track in the middle of the door cover, so carefully measure the size of the 2 side first. < / P > < P > 2, positioning after drilling. < / P > < P > 3, on both sides of the fixed well, drill hole in the middle. 4, the rail installation, wipe clean first < / P > < P > 5, the rail position location, the first door on the top and bottom rail, adjust the position, make the optimum effect of sliding door. < / P > < P > 6, and then fixed rail position, clean up the track layer with brush. < / P > < P > 7, move the door installation. First door gently lift up and leave the door on the pulley into orbit, and then a hand carry live move the door hard, another hand stay pulley, pull the downturn in the wheel well into the next track. < / P > < P > 8, move the door installation is complete, the following article is posted collision avoidance, to move the door protection. < / P > < P > move the door pulley installation process, take a frame 1 and under seal, with a fixed screws < / P > < P > 2, the fixed frame is placed on the ground, and then move the door plank is arranged above the border < / P > < P > 3, take another root border card into the arrangement good move on the door plank, screwed under seal and border < / P > < P > 4, on the card into the sealing, screwed, at the same time fixed pulley < / P > < P > 5, screws are all fixed up and down, with traction screw under the pulley fixed within the next letter, complete the installation of 6, note: install slide wheel, pulley is to promptly. < / P > < P >
James Bond Furniture
House Of Agents
Contact US
Tel&WhatsApp&Wechat:
+86-131-1277-1616
E-mail:
ken@jamesbond-furniture.com
Address:
James Bond Furniture,Dongtou Industrial Zone, Longjiang Town, Shunde District, Foshan City, Guangdong Province, China.
Foshan James Bond Furniture Co., Ltd.