< / P> < P> closet door installation process < / P> < P> 1, on track installation.
Need to track in the middle of the door cover, so carefully measure the size of the 2 side first.
< / P> < P> 2, positioning after drilling.
< / P> < P> 3, on both sides of the fixed well, drill hole in the middle.
4, the rail installation, wipe clean first < / P> < P> 5, the rail position location, the first door on the top and bottom rail, adjust the position, make the optimum effect of sliding door.
< / P> < P> 6, and then fixed rail position, clean up the track layer with brush.
< / P> < P> 7, move the door installation.
First door gently lift up and leave the door on the pulley into orbit, and then a hand carry live move the door hard, another hand stay pulley, pull the downturn in the wheel well into the next track.
< / P> < P> 8, move the door installation is complete, the following article is posted collision avoidance, to move the door protection.
< / P> < P> move the door pulley installation process, take a frame 1 and under seal, with a fixed screws < / P> < P> 2, the fixed frame is placed on the ground, and then move the door plank is arranged above the border < / P> < P> 3, take another root border card into the arrangement good move on the door plank, screwed under seal and border < / P> < P> 4, on the card into the sealing, screwed, at the same time fixed pulley < / P> < P> 5, screws are all fixed up and down, with traction screw under the pulley fixed within the next letter, complete the installation of 6, note: install slide wheel, pulley is to promptly.
< / P> < P>